Replacing a radiator is necessary when an existing unit has corroded internally or externally, has developed a leak in the body panels, or can no longer provide adequate heat output for the room. Radiator replacement is also common during bathroom or room refurbishments where the existing unit is outdated, damaged, or does not suit the new layout.
Before removing the old radiator, the engineer isolates it from the heating circuit using the thermostatic radiator valve (TRV) and lockshield valve. The radiator is drained and removed, and the condition of the existing valves and wall fixings is assessed.
Valves that are stiff, corroded, or no longer seat correctly are typically replaced at the same time as the radiator, since disturbing old valves can cause them to fail to reseal properly. The new radiator is selected to match the required heat output for the room, the existing pipe centres (the distance between the inlet and outlet connections), and the available wall space.
Where the pipe centres of the new unit match those of the old radiator, replacement is relatively straightforward. A change in radiator size or style may require minor pipework alteration to shift the connection points.
Once the new radiator is fitted, the system is bled to remove any air introduced during the process, and system pressure is checked and adjusted if it has dropped. If the water drained from the old radiator is heavily discoloured — indicating iron oxide sludge in the circuit — the engineer may recommend a power flush of the whole system either before or alongside the replacement, to prevent the new radiator from being affected by the same contamination.
