Radiator and central heating problems are among the most frequently reported plumbing issues in UK homes, and Telford properties are no exception. The borough's mix of housing ages means plumbers encounter everything from 1970s gravity-fed systems with separate hot water cylinders through to modern combination boilers and system boilers on sealed pressurised circuits.
An assessment of a central heating system typically covers boiler operation and pressure, the condition and heat distribution of individual radiators, the state of thermostatic radiator valves and lockshield valves, visible pipework, and the operation of any programmer or thermostat controls. Radiators that are cold at the top but warm at the bottom usually contain trapped air and can be bled using a radiator key.
Cold at the bottom or throughout the body of the radiator more often points to sludge and magnetite build-up restricting circulation, which can require a powerflush or an individual flush of the affected radiator. Other common faults include failing circulation pumps, weeping joints at radiator connections, faulty or seized TRVs, and a dropping system pressure caused by a small leak or a failing expansion vessel.
For properties with older gravity-fed systems, additional checks around the feed-and-expansion tank in the loft and the primary circulation circuit are relevant. Knowing whether you have a combi, system or conventional boiler helps any engineer understand what to look for.
